Fanzy pendants, acrylic plastic. Ø 50 mm, hole 2 mm, thickness 3 mm. Use heat to make stylish Fanzy pendants. METHOD: Preheat the oven to 180°C. Place a sheet of baking paper on the baking sheet. Heat the acrylic plastic piece in the oven for 3 minutes until it is soft and mallea...Learn more
1
50+ pcs online
6,49
6,49
More than 15.000
articles
Scandinavian Hobby
& Crafts since 1954
Standard delivery
FREE over 59£
365 day return policy
for members
Fanzy pendants, acrylic plastic. Ø 50 mm, hole 2 mm, thickness 3 mm. Use heat to make stylish Fanzy pendants. METHOD: Preheat the oven to 180°C. Place a sheet of baking paper on the baking sheet. Heat the acrylic plastic piece in the oven for 3 minutes until it is soft and malleable. Wearing gloves, remove it from the oven and shape the piece however you like (twist, bend etc.). Hold the pendant carefully in the desired shape until it has firmed up into a Fanzy pendant (about 30 seconds). If you do not like the results, you can reshape the pendant. Heat it and allow it to return to its original shape first, and then you can start over. It is possible to drill holes in the pendant with a rotary tool or drill, but drill carefully - do not press too hard. Pack of 2 pcs.
Smoky grey
Shared happiness is double happiness! Get inspired by others @panduroofficial
107047https://panduro.com/en/products/jewellery-accessories/basic-materials/frames/fanzy-pendants-o50-smoky-grey-107047Fanzy pendants Ø50 smoky greyhttps://panduro.com/ArticleImages/565x565/107047_01.jpg6,496,49GBPInStockPanduro Hobby/10/1010/101025Fanzy pendants, acrylic plastic. Ø 50 mm, hole 2 mm, thickness 3 mm. Use heat to make stylish Fanzy pendants. METHOD: Preheat the oven to 180°C. Place a sheet of baking paper on the baking sheet. Heat the acrylic plastic piece in the oven for 3 minutes until it is soft and malleable. Wearing gloves, remove it from the oven and shape the piece however you like (twist, bend etc.). Hold the pendant carefully in the desired shape until it has firmed up into a Fanzy pendant (about 30 seconds). If you do not like the results, you can reshape the pendant. Heat it and allow it to return to its original shape first, and then you can start over. It is possible to drill holes in the pendant with a rotary tool or drill, but drill carefully - do not press too hard. Pack of 2 pcs.In Stock